PMT, Humbucker Control, Coil Filters Potentiometer

Product Code: CE-R-VPMT-HCP

Availability:In stock



Precision Music Technologies HCP Control – Humbucker Control Pot with Coil Filter Modes. Made in USA.

The HCP Humbucker Control Pot is a dual mode variable coil tap selector for electric guitars and basses that eliminates the additional switches associated with coil splitting a pair of humbuckers. In TAP mode, rotating the pot counterclockwise fades from humbuckers to outer coils (neck pickup South coil & bridge pickup North coil). Pulling the HCP control up and rotating it counterclockwise fades from humbuckers to inner coils (neck pickup North coil & bridge pickup South coil). Tonal control is expanded with the unique ability to coil tap both humbuckers in varying amounts. In COIL FILTER mode, turning the HCP control applies varying amounts of a specially tuned high frequency filter to only one coil of the selected coils of the humbuckers (either North or South coils can be filtered). This makes each pickup a single coil at high frequencies and a humbucker at lower frequencies which produces a sound similar to a pair of single coils but with a stronger, fuller tone and 50% less noise than coil tapping.

For instructions click  here on


    • Accesses North & South / Inner & Outer Coils.
    • Provides varying amounts of coil tapping for both pickups.
    • Variable "Coil Filter Modes" provide new tonal options.
    • Completely passive-No battery needed.
    • Works with any multi-wire humbuckers.
    • Use with a pair of humbuckers or a single humbucker.
    • No affect on tone at full clockwise setting.

The DMT is a passive dual mode guitar tone control designed specifically for electric guitars that can operate in either HIGH PASS or LOW PASS modes greatly expanding the instruments tonal possibilities without the use of a battery or active electronics. Micro switches on the circuit board provide the user the ability to select one of two different frequency ranges for both high and low pass modes. Easy installation with no capacitors or other parts needed. Replace the tone control in you guitar with one that you will actually use!

  • Operates in Low Pass or High Pass modes.
  • Each mode has selectable frequency range.
  • Tuned specifically for electric guitar
  • Works with all Single Coils & Humbuckers 
  • Completely passive-No battery needed.
  • No affect on tone at full clockwise setting.
  • Simple three wire installation.
  • Shaft Material: Aluminum   
  • Shaft Type: Split Knurl
  • Spline Count (Type): 18 (Coarse)
  • Spline Height: 3/8".375"
  • Threaded Shaft Material: Brass 
  • Threaded Shaft Length: 3/8" .375" 
  • Threaded Shaft Diameter: 3/8" .375"
  • Thread Pitch: 3/8-32NEF 
  • Required Cavity Depth: 1.1