Email to friend
White High Performance Water-based Wood Grain Filler
NEW High Performance White, water-based wood grain filler
Available in 1 US Quart (950ml) or US 1Pint (475ml)
Aqua CoatÕs White Cabinet Grain Filler is a water based gel that helps achieve a glass smooth finish on hard to fill woods such as oak, mahogany, and other porous woods when painting. This small particle size grain filler penetrates and seals the pores minimizing the absorption of your primer and paint, achieving a glass smooth finish. It was formulated with higher solids and better adhesion than its Clear Grain Filler predecessor, helping you finish the job with less coats. The white color highlights the grains and pores as it's being applied making it easier to see where the grain filler was applied and sanded.
It is easy to apply, dries fast, sands easily, and is water clean up. Can be tinted with water soluble trans tints and dyes to accent the grains and pores to help attain your desired look. Unlimited possibilities for hobbyists, crafters, DIYers and makers. Add color to the grain filler to create a personalized touch.
- Ideal where you're filling to go under a solid painted finish (e.g. solid body electric guitars)
- High solids so you get fast fill in open-pore wood
- Easily sanded to a flat smooth finish and easy to see where the filler is
- Can be colour tinted with universal or water based tints to any colour you like
Ideal Customers For White Wood Grain Filler
- Luthiers
- Cabinet refinishers
- Furniture makers
- Gunstock finishers
- Cabinet makers
- Piano restoration
- Antique restoration
- DIY woodworking hobbyists
Ideal for using as a wood grain filler on:
- Guitars and other wood instruments
- Tabletops
- Pianos
- Cabinets
Features & Benefits
- Easy to apply gel; easy sanding
- Extreme visibility, highlighting white gel
- Fast drying times (30-45 minutes)
- Excellent adhesion
- Can be tinted to accent the grains
- Eco-friendly, water-based
- Safe handling (non-flammable, non-combustible)
- Low odor, water clean-up
Wood Grain Filler Directions For Use
Surface Preparation: The surface must be clean and dry (free from all dirt, oil, wax, and polish) before using the Clear Wood Grain Filler. Sand surface thoroughly. Remove all dust with a vacuum, forced air, or a damp cloth (water).
Directions For Use: Wood Grain Filler should be applied after a seal coat has been applied.
- Stain and seal coat must be dry and lightly sanded with 220-grit or finer sandpaper.
- Grain Filler can be tinted with water-soluble colorants or dyes.
- If no stain or seal coat is used, you may apply Clear Grain Filler to the raw wood.
- Grain Filler may be applied with a soft cloth, using a circular motion, much like applying paste wax. Or work Grain Filler generously into open wood grain pores with a small squeegee or flexible putty knife.
- Inspect to see if the grain is completely filled, then scrape or squeegee to remove excess.
- Let dry 30-45 minutes, then lightly sand with 320 grit paper.
- If the grain is not completely filled, repeat the application process.
- 2-3 coats of Grain Filler are recommended.
- Allow over_night dry time and lightly sand before applying topcoats.
| SKU | M-ACW |
| Brand | Guitar Templates |
Be The First To Review This Product!
Help other Guitar Templates users shop smarter by writing reviews for products you have purchased.
Price:
$120.00
Others Also Bought
Others Also Bought
Some Team Favourites
Look What's New
More From This Category
